Gestetner A294 Service Manual page 205

Rev. 10/2000
⇒
As mentioned in section 2.12.5 of the Service Manual, all anti-condensation
heaters are disconnected from the AC drive board before being shipped.
If the main switch is off when the heater AC harness connector [A] is connected to
the AC drive board, the transfer anti-condensation (drum) heater will be turned on
along with the other optional heaters.
!
Caution: Before the heater AC harness connector is plugged in, be sure to turn off the
main switch and unplug the copier power cord.
NOTE: The heater AC harness connector is hung on the clamp under the AC
drive board.
SM
CÓPIA NÃO CONTROLADA
Heater AC harness connector
3-5
3-19D
CÓPIA NÃO CONTROLADA
LCT INSTALLATION (B303)
AC Drive Board
A294/A295