Gestetner A294 Service Manual page 235

Rev. 9/2001
Mode No.
(Class 1, 2 and 3)
1-002 Side-to-Side Registration
3 Tray-3
4 Tray-4 (LCT)
5 Tray-5 (LCT)
6 Tray-6 (LCT)
7 Duplex Tray
1-003 Paper Buckle Adjustment (Registration)
1 Copier Paper
Tray
2 LCT Tray
3 Duplex Tray
1-008 Duplex Fence Adjustment
1-103 Fusing Idling After Low Power Mode
SM
CÓPIA NÃO CONTROLADA
Function
Adjusts the printing side-to-side registration
from the 3rd paper feed station using the
trimming area pattern (SP2-902-3, No.15).
Use the "•" key to toggle between + and –
B before entering the value.
The specification is 0 ± 2.0 mm.
Adjusts the printing side-to-side registration
from the 4th paper feed station using the
trimming area pattern (SP2-902-3, No.15).
B
Use the "•" key to toggle between + and –
before entering the value.
The specification is 0 ± 2.0 mm.
Adjusts the printing side-to-side registration
from the 5th paper station using the
trimming area pattern (SP2-902-3, No.15).
B
Use the "•" key to toggle between + and –
before entering the value.
The specification is 0 ± 2.0 mm.
Adjusts the printing side-to-side registration
from the 6th paper station using the
trimming area pattern (SP2-902-3, No.15).
B
Use the "•" key to toggle between + and –
before entering the value.
The specification is 0 ±2.0 mm.
Adjusts the printing side-to-side registration
from the duplex tray using the trimming
area pattern (SP2-902-3, No.15).
B
Use the "•" key to toggle between + and –
before entering the value.
The specification is 0 ±2.0 mm.
Adjusts the relay clutch timing at
B
registration. The relay clutch timing
determines the amount of paper buckle at
B
registration. (A +ve setting leads to more
buckling.)
B
Adjusts the distance between the front and
B rear fences.
Selects whether fusing idling is done or not
when recovering from the low power mode.
B
4-13
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Settings
+9 ~ –9
0.1 mm/step
–1.5 mm
+9 ~ –9
0.1 mm/step
–2.5 mm
+9 ~ –9
0.1 mm/step
–2.5 mm
+9 ~ –9
0.1 mm/step
–2.5 mm
+9 ~ –9
0.1 mm/step
–3.0 mm
+9 ~ –9
1 mm/step
+4.0 mm
+4 ~ –4
0.5 mm/step
0.0 mm
0: Not done
1: Done
A294/A295