Gestetner A294 Service Manual page 366

DRUM UNIT
8. Remove the wire cleaner [A] (1 snap ring).
9. Install the wire cleaner and the charge corona wire.
NOTE: Locate the joint part [B] of the wire in the rear end block as shown.
After installing new wires, reset SP2-001-1 to 2-001-6 (corona voltage and current)
to the defaults. Then do SP2-962 (process control initialization).
A294/A295
CÓPIA NÃO CONTROLADA
[B]
6-36
CÓPIA NÃO CONTROLADA
[A]
A294R553.WMF
SM