Gestetner A294 Service Manual page 267

Rev. 9/2001
Mode No.
(Class 1, 2 and 3)
4-911 HDD 1 Front (Black)
1 HDD 1 Media
Check
2 HDD 1
Formatting
HDD 1 Bad
6
Sector
Information
Reset
7 HDD 1 Bad
Sector Display
8 HDD 1 Model
Name Display
SM
CÓPIA NÃO CONTROLADA
Function
Checks for bad sectors on hard disk 1 that
develop during machine use. This takes 4
minutes.
All the image data on this disk is erased,
and the stamp data is erased from both
disks.
This SP mode should be done when an
abnormal image is printed. There is no
need to do this at installation because the
S hard disk firmware already contains bad
sector information, and damage is not likely
during transportation.
Bad sectors detected with this SP mode will
be stored in the NVRAM with the bad
sector data copied across from the
firmware.
If the machine detects over 50 bad sectors,
SC364 will be generated. At this time, use
SP4-911-2.
Formats hard disk 1. This takes 4 minutes.
S Do not turn off the main power switch
during this process.
Resets the bad sector information which is
stored in the NVRAM.
This SP should be used when the hard disk
is replaced.
Displays the number of bad sectors there
are on hard disk 1.
S If the machine detects a total of over 50
bad sectors on the disk, SC364 will be
generated. At this time, use SP4-911-2.
Displays the model name of HDD 1.
If the HDD is not installed or the HDD
connector is not connected, SC360 will be
displayed. However, the user can make
single copies.
4-45
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Settings
Start
Total: 0
Copy: 0
Printer: 0
AF (Copy
Server): 0
A294/A295