Gestetner A294 Service Manual page 249

Rev. 9/2001
Mode No.
(Class 1, 2 and 3)
4-012 Scanner Erase Margin
1 Leading Edge
2 Trailing Edge
3 Right
4 Left
4-013 Scanner Free Run
4-015 Scanner Speed Adjustment
4-301 APS Sensor Output Display
4-303 APS A5/HLT Size Original Detection
4-428 Scanner Adjustment
1 Flag Display
2 Standard
SM
CÓPIA NÃO CONTROLADA
Function
Adjusts the leading edge erase margin for
scanning.
S Do not adjust this unless the user wishes to
have a scanner margin that is greater than
the printer margin.
Adjusts the trailing edge erase margin for
scanning.
S
See the comment for SP4-012-1.
Adjusts the right side erase margin for
scanning.
S
See the comment for SP4-012-1.
Adjusts the left side erase margin for
scanning.
S
See the comment for SP4-012-1.
Performs a scanner free run with the
exposure lamp on.
Displays the value of the scanner speed
fine adjustment. This setting can be
changed using the number keys.
S The scanner speed fine adjustment is
automatically done when the main switch is
turned on, and the current setting is
overwritten.
Displays the APS sensor output signals
when an original is placed on the exposure
glass
Selects whether or not the copier
determines that the original is A5/HLT size
when the APS sensor does not detect the
size.
If "A5 length/5 " x 8
1/2
sizes that cannot be detected by the APS
sensors are regarded as A5 lengthwise or
S
5 " x 8 ".
1/2 1/2
If "Not detected" is selected, "Cannot detect
original size" will be displayed.
Displays whether or not the standard white
S
level adjustment has been done.
Corrects the standard white level from the
white plate.
This SP mode is for factory use only. Do
not use this SP mode.
4-27
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
0.0 ~ 0.9
0.1 mm/step
0.5 mm
0.0 ~ 0.9
0.1 mm/step
0.5 mm
0.0 ~ 0.9
0.1 mm/step
0.5 mm
0.0 ~ 0.9
0.1 mm/step
0.5 mm
0: Stop
1: Start
–20 ~ +20
1/step
0
0: Not
1: A5 length/
2: Not
"" is selected, paper
1/2
3: A5 length/
Adjusted
Not adjusted
Start
Settings
detected
5 " x 8 "
1/2 1/2
detected
5 " x 8 "
1/2 1/2
(Setting 2 or
3 is required
if 267 x 390
and 267 x
195 paper is
used.)
A294/A295