Gestetner A294 Service Manual page 135

[D]
[B]
A294D097.WMF
When the lift motor turns on, the pick-up solenoid [A] activates to lower the pick-up
roller [B]. When the top sheet of paper reaches the correct height for paper feed,
the paper pushes up the pick-up roller and the actuator [C] on the pick-up roller
supporter [D] activates the lift sensor [E] to stop the lift motor.
After several paper feeds, the paper level gradually lowers then the lift sensor is
de-activated and the lift motor turns on again until the lift sensor is activated again.
When the tray is drawn out of the feed unit, the lift motor coupling gear [F]
disengages the pin [G] of the lift shaft [H], then the tray bottom plate [I] drops (the
damper slows the fall, as explained on the previous page).
There is also a paper end sensor for the 1st tray, which works in the same way as
the sensor in the 2nd and 3rd trays.
SM
CÓPIA NÃO CONTROLADA
[A]
[E]
[C]
2-85
CÓPIA NÃO CONTROLADA
PAPER FEED
[G]
[I]
[H]
A294D098.WMF
A294/A295
[F]