Gestetner A294 Service Manual page 191

COPIER (A294)
A294I012.WMF
[F]
A294I014.WMF
19. Remove the right upper cover [A] (4 screws).
20. Pass the harness through the operation unit arm [B], and install the arm as
shown (9 screws).
21. Connect the 2 connectors [C] of the operation unit.
22. Secure the harness clamp [D] on the operation unit (one M4 x 6 pan head
screw). Pass the harness [E] through the clamps as shown. Then install the
operation unit on the arm (4 screws).
23. Set the nylon clamp [F].
24. Install the right arm cover [G] (3 screws) and the arm upper cover [H] (2
screws).
SM
CÓPIA NÃO CONTROLADA
[A]
[E]
[D]
3-9
CÓPIA NÃO CONTROLADA
[B]
A294I013.WMF
A294I015.WMF
[C]
[H]
[G]
A294/A295