Gestetner A294 Service Manual page 449

Rev. 02/2000
Blank Margin
NOTE: If the leading edge/side-to-side registration cannot be adjusted within
the specifications, adjust the leading/left side edge blank margin.
1. Check the trailing edge and right side edge blank margins using the Trimming
Area Pattern, and adjust them using the following SP modes if necessary.
Trailing edge
Right edge
Leading edge
Left edge
SM
CÓPIA NÃO CONTROLADA
COPY IMAGE ADJUSTMENT: PRINTING/SCANNING
SP mode Specification
3 ± 2 mm
SP2-101-2
SP2-101-4 More than 0.5 mm
3 ± 2 mm
SP2-101-1
2 ± 1.5 mm
SP2-101-3
A: Trailing Edge Blank Margin
B: Right Edge Blank Margin
C: Leading Edge Blank Margin
D: Left Edge Blank Margin
6-119
CÓPIA NÃO CONTROLADA
D
C
B
A294R634.WMF
A294/A295
A