Drive - Gestetner A294 Service Manual

PAPER FEED

2.8.2 DRIVE

[I]
[A]: Paper Feed Unit Motor
[B]: Paper Feed Clutches 1 to 3
[C]: Vertical Transport Clutches 1 to 3
[D]: Lower Relay Clutch
[E]: Relay Motor
[F]: Upper Relay Clutch
[G]: LCT Relay Clutch
The paper feed motor [A] drives feed, pick-up, and separation rollers in trays 1, 2,
and 3 via timing belts, clutches [B], and gears. The paper feed motor also drives
the vertical transport rollers and the lower relay roller. Drive is transferred to each
of the three vertical transport rollers by a vertical transport clutch [C], and to the
lower relay roller by the lower relay clutch [D].
The relay motor [E] drives the upper relay roller and LCT relay roller via gears and
clutches [F] and [G].
The 2nd vertical transport clutch has a one-way-gear [H]. This prevents the clutch
from slipping when the knob [I] is turned to remove jammed paper in the paper feed
tray and vertical transport area.
A294/A295
CÓPIA NÃO CONTROLADA
[H]
[C]
2-72
CÓPIA NÃO CONTROLADA
[G]
[F]
[E]
[C]
[B]
[D]
[B]
A294D709.WMF
Rev. 2/2000
[A]
SM