Off Mode - Gestetner A294 Service Manual

ENERGY SAVER MODES

2.12.4 OFF MODE

Off mode has two separate modes.
• Auto Off Mode (Sleep mode)
• Weekly Timer Off Mode
Off Mode (Sleep Mode)
Entering Off Mode
The machine enters off mode when one of the following is done.
• The auto off timer runs out after the end of a job
• The operation switch is pressed to turn the power off
What Happens in Off Mode
When the machine enters auto off mode, the operation switch turns off
automatically. The fusing lamp and all dc supplies except +5 VE (+5 V for energy
saver mode) turns off. At this time, only the main power LED is lit.
Operation
Switch
Off
NOTE: Only +5 VE is supplied to the SICU.
LED (+5 V) is supplied to the operation panel from the SICU.
Returning to Stand-by Mode
The machine returns to stand-by mode when the operation switch is pressed.
Printing Incoming Data
If the machine receives print data from a PC, the fusing temperature rises to print
the data. However, the operation panel stays off. After completing the print job, the
machine returns to off mode (sleep mode).
A294/A295
CÓPIA NÃO CONTROLADA
Energy
Fusing Temp.
Saver LED
Room Temp.
Off
(Fusing lamp off)
2-122
CÓPIA NÃO CONTROLADA
Main Power
System +5 V
Off
LED
On
SM