Gestetner A294 Service Manual page 124

PAPER FEED
[D]
[B]
A294D605.WMF
When the lift motor turns on, the pick-up solenoid [A] activates to lower the pick-up
roller [B]. When the top sheet of paper reaches the correct height for paper feed,
the paper pushes up the pick-up roller, and the actuator [C] on the pick-up roller
supporter [D] leaves the lift sensor [E]. Then, the lift motor stops.
After several paper feeds, the paper level gradually lowers and the lift sensor is de-
activated. Then the lift motor turns on again until the lift sensor detects the actuator
again.
When the tray is drawn out of the feed unit, the lift motor coupling gear [F]
disengages the pin [G] of the lift arm shaft [H], then the tray bottom plate [I] drops
under its own weight.
A294/A295
CÓPIA NÃO CONTROLADA
[A]
[E]
[C]
[I]
2-74
CÓPIA NÃO CONTROLADA
[F]
[G]
[H]
A294D606.WMF
SM