Low Power Mode - Gestetner A294 Service Manual

2.12.3 LOW POWER MODE

Entering Low Power Mode
The energy saver timer runs out after the end of a job.
NOTE: The energy saver timer cannot be cancelled.
What Happens in Low Power Mode
The fusing lamp drops to 143°C. The other conditions are the same as for energy
saver (panel off) mode.
Return to Stand-by Mode
The machine returns to standby mode in exactly the same way as from energy
saver (panel off) mode.
Recovery Operation
Time Switch
About
On
40 seconds
SM
CÓPIA NÃO CONTROLADA
Energy Fusing
Saver LED Temp.
On
143°C
2-121
CÓPIA NÃO CONTROLADA
ENERGY SAVER MODES
Main Power
System +5 V
LED
On On
A294/A295