FINISHER INSTALLATION (B302)
3.3.2 INSTALLATION PROCEDURE
B302I002.WMF
B302I014.WMF
!
CAUTION
Unplug the machine power cord before starting the following procedure.
1. Unpack the finisher and remove the tapes and shipping retainers as shown
above.
2. Open the front door and remove the shipping retainers. Remove the bracket [A]
(2 screws) securing the stapler unit.
3. Install the front joint bracket [B] and rear joint bracket [C] (two M4 x 14 screws
each) on the left side of the copier.
4. Remove the connection plate [D].
A294/A295
CÓPIA NÃO CONTROLADA
[A]
3-14
CÓPIA NÃO CONTROLADA
[C]
[D]
B302I003.WMF
[B]
B302I019.WMF
SM