Replacement And Adjustment; Bottom Plate Lift Wire Replacement - Gestetner A294 Service Manual

3. REPLACEMENT AND ADJUSTMENT

3.1 BOTTOM PLATE LIFT WIRE REPLACEMENT

NOTE: Before replacing the rear bottom plate lift wire, remove the front bottom
plate lift wire. The procedure for the two wires is the same.
[C]
1. Remove the tray.
2. Remove the inner cover (2 screws).
3. Slightly lift the front bottom plate and unhook the wire stoppers [A] (2 stoppers
[B]).
4. Remove the wire cover [C] (1 E-ring each).
5. Remove the bracket [D] (1 screw, 1 E-ring, and 1 bushing).
6. Remove the gear [E].
7. Replace the bottom plate lift wire [F].
SM
CÓPIA NÃO CONTROLADA
BOTTOM PLATE LIFT WIRE REPLACEMENT
[A]
[B]
10-3
CÓPIA NÃO CONTROLADA
[F]
[C]
[E]
[B]
[A]
B331R102.WMF
[D]
A294/A295