Gestetner A294 Service Manual page 285

Rev. 9/2001
Mode No.
(Class 1, 2 and 3)
7-801 ROM Version Display
7-803 PM Counter Display
7-804 PM Counter Reset
7-807 SC/Jam Counter Reset
7-808 Counter Clear
7-810 Access Code Clear
7-816 Copy Counter Clear- Paper Tray
1 Paper Tray 1
2 Paper Tray 2
3 Paper Tray 3
4 Paper Tray 4
5 Paper Tray 5
6 Paper Tray 6
7-817 Total ADF Counter Reset
7-822 Copy Counter Clear - Magnification
7-825 Total Counter Clear
7-826 Option Counter Error Counter
1 Total
2 Staple
7-827 Option Counter Error Counter Clear
7-828 Punch Counter Clear
SM
CÓPIA NÃO CONTROLADA
Function
Displays the ROM versions.
001: SICU
002: BCU
003: CSS (P1) – Japan only
004: HDC (Hard disk controller)
005: Scanner
006: ADF
007: Finisher
008: Printer
S Displays the PM counter since the last PM.
Resets the PM counter.
Resets the SC and jam counters. Press
"Start" to reset.
Resets all counters, except for the total
counters (SP 7-003):
Press "Start" to reset.
Resets both the key operator code and the
weekly timer code ('key operator code for
off setting'). Press "Start" to reset.
Resets the total copy counter by paper
tray. These SP modes can be used after
replacing the pick-up, feed, and separation
rollers in the paper feed stations.
Resets the ADF Counter (SP7-205). Press
"Start" to reset.
Resets all counters of SP7-301.
Resets the electrical total counter.
Usually, this SP mode is done at
installation.
This SP mode works only once when the
counter value is negative.
S For Japanese version only.
S
For Japanese version only.
Resets the punch counter (SP7-207)
4-58e
4-63
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Settings
Start
Start
Start
Start
Start
Start
Start
Start
A294/A295