Gestetner A294 Service Manual page 382

TRANSFER BELT UNIT
[A]
[B]
A294R403.WMF
2. Attach the transfer belt unit holder [A] (1 screw).
NOTE: Align the three holes [B] with the three projections [C].
3. After installation, check the following points:
1) The transfer belt unit must move up and down smoothly
2) Part [D] of the transfer belt unit must be behind the drum stay,
3) Part [D] of the transfer belt unit must be set in the indent [E] in the drum unit
casing.
A294/A295
CÓPIA NÃO CONTROLADA
[C]
6-52
CÓPIA NÃO CONTROLADA
[E]
[D]
A294R404.WMF
SM