Toner Bank Unit Removal - Gestetner A294 Service Manual

6.11.2 TONER BANK UNIT REMOVAL

[A]
[B]
A294R903.WMF
[D]
A294R905.WMF
1. Follow steps 1 to 6 of the Transportation Remarks (section 3), (Procedure
Before Transportation).
2. Turn off the main switch and unplug the power cord. Follow steps 1 and 2 of
the waste toner bottle removal procedure.
CAUTION
Make sure that the power cord is unplugged before removing the noise
filter in the next step.
3. Remove the noise filter [C] (2 screws and 4 connectors; upper:
➂ ➀
lower: , yellow) and toner bank motor [D] (2 screws, 1 connector).
4. Disconnect the three connectors [E] from the toner bank unit.
SM
CÓPIA NÃO CONTROLADA
[E]
6-105
CÓPIA NÃO CONTROLADA
TONER BANK
[C]
A294R904.WMF
➃ ➁
,
A294/A295
white