Gestetner A294 Service Manual page 233

Rev. 9/2001
Inputting a Value or Setting for an SP Mode
1. Select the required program mode as explained on the previous page.
2. Enter the required setting using the ten-key pad, then touch the "Start" key or
OK key or 7 key.
NOTE: 1) If you forget to touch the "Start" key or OK key, the previous value
remains.
2) Change between "+" and "–" using the "•" key before entering the
required value.
3. Exit SP mode.
SM
CÓPIA NÃO CONTROLADA
4-11
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
A294/A295