Gestetner A294 Service Manual page 220

TRANSPORTATION REMARKS
Make sure that three tubes are connected to the toner supply cylinder when
putting it back.
Procedure after transportation (loading toner into the toner transport
tube):
1. Load the toner bottles into the toner bank.
2. Remove the upper right cover. Open the cylinder top cover and clean the inner
surface of the cylinder with a cloth to check the toner supplying at step 6. Then
close the cylinder top cover.
3. Energize the toner bank motor using SP5-804-61.
4. Energize the toner bottle motors for 5 to 6 seconds using SP5-804-59, -60.
5. Energize the toner supply coil clutch using SP5-804-64.
6. 50 to 60 seconds later, toner is supplied to the toner supply cylinder. Make sure
that toner is properly supplied to the cylinder.
7. Turn off the toner supply coil clutch and then the toner bank motor.
8. Return all removed parts.
Do not energize the toner bottle for long periods of time, otherwise toner overflow
in the toner entrance tank may occur.
A294/A295
CÓPIA NÃO CONTROLADA
3-34
CÓPIA NÃO CONTROLADA
Rev. 6/2000
SM