Feed-In Clutch Replacement - Gestetner A294 Service Manual

6.2.8 FEED-IN CLUTCH REPLACEMENT

[B]
[C]
[D]
B301R122.WMF
[L]
[I]
B301R124.WMF
1. Remove the rear cover.
2. Remove a screw from the tightener [A].
3. Remove the timing belt [B].
4. Remove the pulley [C] and ball bearing [D] from the feed-in drive shaft (1 E-
ring, 1 pin).
5. Remove the pulley [E] and bushing [F] from the pick-up roller cam shaft (1 E-
ring, 1 pin)
6. Remove the ball bearing [G] from the feed belt drive shaft (1 E-ring).
7. Remove the feed-in clutch assembly [H] (5 screws).
8. Remove 2 ball bearings [I] from the feed-in clutch shaft (1 E-ring each).
9. Remove the pulley [J], pin and timing belt [K].
10. Replace the feed-in clutch [L].
NOTE: When re-installing the feed-in clutch, put the stopper screw [M] in the
clutch hook.
SM
CÓPIA NÃO CONTROLADA
[A]
[K]
[G]
[J]
[I]
[M]
6-17
CÓPIA NÃO CONTROLADA
DOCUMENT FEEDER
[F]
[E]
[H]
B301R123.WMF
A294/A295