Transport Belt Replacement - Gestetner A294 Service Manual

DOCUMENT FEEDER

6.2.6 TRANSPORT BELT REPLACEMENT

[A]
B301R113.WMF
B301R512.WMF
1. Remove the front cover.
2. Release the entrance guide [A] (2 screws).
3. Remove the three screws securing the transport belt assembly [B].
4. Fold up the transport belt assembly extension [C].
5. Pull off the transport belt [D] and replace it.
NOTE: When installing the transport belt, make sure that the belt runs under the
upper and lower belt guide spacers [E].
6. Using SP6-009, do a DF free run for 3 minutes. After the free run is finished,
clean off any dust that came off the transport belt onto the exposure glass.
A294/A295
CÓPIA NÃO CONTROLADA
[B]
[E]
6-14
CÓPIA NÃO CONTROLADA
[D]
[C]
B301R511.WMF
SM