Gestetner A294 Service Manual page 197

FINISHER INSTALLATION (B302)
[A]
B302I004.WMF
[C]
[D]
B302I107.WMF
5. Install the grounding plate [A] (two M3 x 6 screws).
NOTE: Set the grounding plate so that there is no gap between the grounding
plate and the bottom frame of the finisher (as shown).
6. Install the rear tray as shown [B] (two M4 x 8 screws).
NOTE: The edge of the rear tray should be aligned with the edge of the finisher
(as shown).
7. Attach the cushion [C] to the right side of the upper cover.
8. Install the entrance guide plate [D] (two M3 x 6 screws).
SM
CÓPIA NÃO CONTROLADA
0 ~ 2 mm
0 ~ 5 mm
3-15
CÓPIA NÃO CONTROLADA
[B]
B302I005.WMF
A294/A295