Gestetner A294 Service Manual page 478

SERVICE CALL CONDITIONS
SC504: LCT 1st Tray Lift Malfunction
Definition [C]
One of the following conditions is detected in the LCT 1st tray.
1) The LCT 1st lift sensor is not activated for 10 seconds after the tray lift motor
turned on.
2) The LCT 1st lift sensor is already activated when the LCT 1st tray is placed
in the machine.
Possible Causes
• LCT 1st lift sensor defective
• LCT 1st tray lift motor defective
• Poor LCT 1st pick-up solenoid connection
• Poor LCT 1st tray lift motor connection
SC505: LCT 2nd Tray Lift Malfunction
Definition [C]
One of the following conditions is detected in the LCT 2nd tray.
1) The LCT 2nd lift sensor is not activated for 10 seconds after the tray lift
motor turned on.
2) The LCT 2nd lift sensor is already activated when the LCT 2nd tray is placed
in the machine.
Possible Causes
• LCT 2nd lift sensor defective
• LCT 2nd tray lift motor defective
• Poor LCT 2nd pick-up solenoid connection
• Poor LCT 2nd tray lift motor connection
SC506: LCT 3rd Tray Lift Malfunction
Definition [C]
One of the following conditions is detected in the LCT 3rd tray.
1) The LCT 3rd lift sensor is not activated for 10 seconds after the tray lift motor
turned on.
2) The LCT 3rd lift sensor is already activated when the LCT 3rd tray is placed
in the machine.
Possible Causes
• LCT 3rd lift sensor defective
• LCT 3rd tray lift motor defective
• Poor LCT 3rd pick-up solenoid connection
• Poor LCT 3rd tray lift motor connection
A294/A295
CÓPIA NÃO CONTROLADA
7-20
CÓPIA NÃO CONTROLADA
Rev. 9/2001
SM