Feed Unit Removal And Separation Roller Replacement - Gestetner A294 Service Manual

6.2.2 FEED UNIT REMOVAL AND SEPARATION ROLLER
REPLACEMENT
1. Open the left cover.
2. Remove the clip [A].
3. Remove the feed unit [B].
(Pull the feed unit to the front, release the shaft at the rear, and release the
front bushing.)
4. Remove the separation roller cover [C].
5. Remove the snap ring [D].
6. Remove the torque limiter [E] and separation roller [F].
SM
CÓPIA NÃO CONTROLADA
[D]
6-7
CÓPIA NÃO CONTROLADA
DOCUMENT FEEDER
[A]
[B]
[C]
[E]
[F]
B301R107.WMF
A294/A295