Fusing And Exit Unit Removal - Gestetner A294 Service Manual

FUSING UNIT

6.9.9 FUSING AND EXIT UNIT REMOVAL

[A]
!
CAUTION
The fusing and exit unit is heavy. Take care not to injure yourself by
dropping the fusing and exit unit when removing and installing it.
1. Remove the fusing unit inner cover [A] (2 screws).
2. Remove the fusing and exit unit [B] (4 screws).
NOTE: 1) When putting back the fusing and exit unit, hook the cutouts [C] on the
projections [D] on the right and left slide rails.
2) The fusing inner cover prevents the fusing and exit unit from hooking the
fusing and exit unit on the slide rails. Put back the fusing and exit unit
without the fusing inner cover. Then, put back the fusing inner cover.
A294/A295
CÓPIA NÃO CONTROLADA
[B]
[C]
[D]
6-94
CÓPIA NÃO CONTROLADA
[D]
A294R516.WMF
SM