Gestetner A294 Service Manual page 301

1. All PM Parts List
Displays all the counters for PM parts.
On this screen, the current counter and the target yield of each PM part can be
checked.
Additionally, the PM yield indicator setting can be changed. To change the setting
press [Yes/No] key in the "PM yield" column.
When "Parts list for PM yield" is selected in the parts replacement menu, only the
parts with [Yes] in the "PM yield" are listed.
To clear a counter, press [Clear] on the display. The following appears.
Then press [Yes] to clear the counter.
SM
CÓPIA NÃO CONTROLADA
4-73
CÓPIA NÃO CONTROLADA
PM COUNTER
A294M014.PCX
A294M016.PCX
A294/A295