TRANSFER BELT UNIT
[B]
[A]
[G]
⇒
[G]
5. Turn the belt drive roller holder [A] clockwise (front view).
6. Replace the transfer belt [B].
NOTE: 1) Before installing the transfer belt, clean both sides of the transfer
2) Before installing the transfer belt, clean the following items with
3) Position the transfer belt at the center of the belt roller [D]. (Both
4) Set the transfer belt under the bias terminals [G] (see the previous
A294/A295
CÓPIA NÃO CONTROLADA
[C]
[D]
belt with a dry cloth (do not use alcohol).
alcohol.
• Belt drive roller [C]
• Belt roller [D]
• Bias roller [E]
marks [F] should be visible.)
page).
CÓPIA NÃO CONTROLADA
[E]
6-54
Rev. 6/2000
[G]
A294R523.PCX
[F]
A294R524.WMF
SM