Pick-Off Pawl Replacement - Gestetner A294 Service Manual

DRUM UNIT

6.5.7 PICK-OFF PAWL REPLACEMENT

[A] [B]
A294R559.WMF
1. Remove the drum. (Refer to Drum Unit Removal and Drum Replacement.)
2. Remove the spur bracket [A] and pick-off pawl bracket [B] (2 screws).
3. Remove the bushing [C] (1 screw, 1 retaining ring).
4. While pulling the shaft [D] to the rear, turn the pick-off pawl shaft about 45
degrees clockwise (as viewed from the front) in order to move up the pick-off
pawl.
5. Replace the pick-off pawl [E].
NOTE: 1) Do not forget to hook the tension spring [F].
2) After replacement, check that the pick-off pawl moves smoothly.
3) Do not touch the pick-off pawl edge.
A294/A295
CÓPIA NÃO CONTROLADA
[E]
6-40
CÓPIA NÃO CONTROLADA
[F]
[D]
A294R561.WMF
[C]
SM