Gestetner A294 Service Manual page 598

DIFFERENCES FROM THE A294 I / A295 I MODELS
Mode No.
(Class 1, 2 and 3)
2-971 Collected Toner Level Check
3 Toner Suction
Motor
2-972 Sucked Toner Collection Bottle Operation Time
2-973 Toner Suction Motor Operation Time
2-974 Toner Supply Interval
3-902 Process Control Data Display
9 V Correction
D
3-903 V Correction Counter
D
A294/A295
CÓPIA NÃO CONTROLADA
Displays whether the toner suction motor
needs to be replaced or not.
(A294/A295 II models only)
Displays the total operation time of the
toner suction motor to maintain the sucked
toner collection bottle replacement.
<Preset Values>
B
Near full: 280 hours, Full: 300 hours
Reset the value to 0 (zero) by pressing 0
and # (Enter) keys when the bottle is
replaced.
Displays the total operation time of the
toner suction motor to maintain the toner
suction motor replacement.
<Preset Values>
B
Near full: 570 hours, Full: 600 hours
Reset the value to 0 (zero) by pressing 0
and # (Enter) keys when the bottle is
replaced.
Adjusts the interval of toner supply. (Once
every how many prints)
• The operation of SP2-968 has been
changed.
• The V
update interval has been
REF
changed from "every 100 prints" to
"every (100 X (SP2-974 value + 1))
prints".
Displays whether the V
performed. The target value of the V
B
correction is "SP2-001-7 value + 50".
(A294/A295 II models only)
Adjusts the starting point for the V
Correction.
Displays whether the V
performed. The target value of the V
correction is "SP2-001-7 value + 50".
B
(A294/A295 II models only)
The counter to control the V
automatically reset to 0 (zero) when
SP2-801 is performed.
11-12
CÓPIA NÃO CONTROLADA
Function
correction is being
D
D
D
correction is being
D
D
correction is
D
Settings
0: Not needed
1: Needed
soon
2: Needed
XXX hours
XXX hours
0: 1/1 (every
print)
1: 1/2 (every 2
prints)
2: 1/3 (every 3
prints)
3: 1/4 (every 4
prints)
0: Not
performed
1: Performed
0 ~ 999
1 k prints/step
100 k prints
SM