Punch Unit Installation - Gestetner A294 Service Manual

PUNCH UNIT INSTALLATION (A812)

3.5.2 PUNCH UNIT INSTALLATION

[B]
A812I500.WMF
[E]
A812I008.WMF
!
CAUTION
Unplug the copier power cord and remove the finisher from the copier
before starting the following procedure.
Unpack the punch unit and remove the shipping retainers [A] (4 screws) and [B] (1
screw)
1. Remove the inner cover [C] of the finisher and remove the caps [D].
2. Remove the rear cover of the finisher (2 screws) and remove the transport
guide plate [E] (4 screws).
SM
CÓPIA NÃO CONTROLADA
[A]
3-21
CÓPIA NÃO CONTROLADA
[C]
[D]
A812I007.WMF
[D]
A294/A295