Preventive Maintenance Schedule; Pm Parts - Gestetner A294 Service Manual

3. PREVENTIVE MAINTENANCE SCHEDULE

3.1 PM PARTS

Symbol key: R, r: Replace on a PM part counter basis (refer to Service Tables – PM Counter)
R: The counter counts up every copy, in the same way as the copy counter
r: The counter only counts up if that part was used for the copy
I: Inspect, and clean and/or lubricate
i: Inspect, and clean and/or lubricate only if necessary
3.1.1 NEWLY ADDED PM PARTS
Description
Sucked Toner Collection
Bottle
Development Suction
Motor Ass'y
Ozone Filter
Carrier Catcher
Hot Roller Gear
Fusing Web Brake Pad
3.1.2 PM PARTS WITH NEW INTERVAL VALUES
Description
Developer
Grid Plate
Charge Corona Wire
Wire Cleaner
Wire Cushion
Oil Supply & Cleaning
Web
Pressure Roller
NOTE: The target value on the PM parts list in the SP mode is initially set to "0".
Please manually change the value to an appropriate one at installation or
when the enhancement kit is installed.
The PM yield indicator for this part is initially set to "not indicated". Please
manually change the setting to "indicated" when necessary.
SM
CÓPIA NÃO CONTROLADA
DIFFERENCES FROM THE A294 I / A295 I MODELS
Activity Type Interval
r 1,200 k
r 2,500 k
r 1,500 k
i 300 k
I 300 k
r 600 k
Activity Type Interval
r 300 k
r 300 k
r 300 k
r 300 k
r 300 k
300 k (EU)
R
600 k (US)
r 500 k
11-13
CÓPIA NÃO CONTROLADA
Note/Remarks
A4 6% Chart
A4 6% Chart
Grease (Barrierta)
Note/Remarks
TD sensor initial setting
(SP2-801)
See below
A294/A295