Grid Plate/Charge Corona Wire/Wire Cleaner Replacement - Gestetner A294 Service Manual

6.5.3 GRID PLATE/CHARGE CORONA WIRE/WIRE CLEANER
REPLACEMENT
[A]
[C]
A294R555.WMF
[E]
[F]
[D]
[G]
A294R305.WMF
1. Take out the charge corona unit [A] (1 screw, 1 connector).
2. Remove the grid plate [B] (1 plastic screw, 4 hooks).
NOTE: 1) When installing the grid plate, do not tighten the plastic screw [C] too
strongly.
2) Do not touch the corona wire and grid plate with bare hands.
3. Remove the front grid terminal [D], then the front end block cover [E].
4. Remove the plate [F].
5. Remove the terminal spring [G].
6. Slide the rear grid terminal [H] to the rear and remove it, then remove the rear
end block cover [I].
7. Remove the charge corona wire [J].
SM
CÓPIA NÃO CONTROLADA
[B]
[I]
[J]
6-35
CÓPIA NÃO CONTROLADA
DRUM UNIT
[H]
A294R314.WMF
A294/A295