Gestetner A294 Service Manual page 503

Rev.10/2000
⇒
DESCRIPTION OF MODIFICATION
1. SP6-120 Jogger Position Adjustment
To correspond to various paper types, a
function to adjust jogger movement towards
paper has been added.
To enable this adjustment, a modified finisher
ROM (B3025103C) or later is required.
However, at this moment the SP6-120 was
not displayed in SP mode. Refer to
Ver.7.23.2.
2. Spanish Language
Spanish has been released for 2nd language
of NA (-17) model.
1st Language: English (NA)
2nd Language: Spanish
Note: The part numbering system for the firmware has been changed. Beginning with version
7.23.2, the part numbers for the SICU and BCU firmware will be written continuously, as one part
number (A2945604F/A2945264F). This is to avoid any confusion with the internal handling of the
firmware.
Corrections (Ver. 7.23.2)
1. SC990 Prevention
After the setting of SP2-506 is changed to
"On", SC990 occurs in Cover/Slip Sheet Mode
if a blank sheet is fed when drum cleaning
begins.
2. Image Density Drop in Magazine Mode
In Magazine Mode, image density drops in 1
out of 10 sheets of the first set.
3. SP6-120 display title missing
The title for SP6-120 "Staple Jogger
Adjustment" is not displayed. This correction
makes only SP6-120 be displayed in the SP
mode. SP6-120 adjustment becomes effective
when the Finisher firmware is updated to C
version or later together with updating
mainframe firmware.
1. SP4-915
SP modes have been added that will display
the CD-R/RW model name and firmware
version.
SP4-915-1: CD-RW Model Name Display
SP4-915-2: CD-RW F/W Version Display
2. CD-R/RW Function
The option CD-R/RW can be used from ver
7.23.2
SM
CÓPIA NÃO CONTROLADA
A294 / A295 FIRMWARE MODIFICATION HISTORY
CÓPIA NÃO CONTROLADA
FIRMWARE SERIAL
LEVEL NUMBER
A2945604 F / From Mar, 00
A2945264 F production
7-45
FIRMWARE HISTORY
FIRMWARE
VERSION
7.23.2
A294/A295