Gestetner A294 Service Manual page 215

KEY COUNTER INSTALLATION
[A]
[B]
A294I205.WMF
If the optional LCT is installed:
The following steps are required when the key counter is installed with the optional
LCT.
The extension cable is required to install the key counter with the LCT. The cable is
supplied with 6 clamps as a service part.
9. Remove the small cover [A] (2 screws) on the LCT right cover.
10. Remove the LCT right cover [B] (6 screws) and rear cover [C] (3 screws).
11. Install 2 clamps [D] on the right side of the LCT, then set the cable [E] in the
clamps.
SM
CÓPIA NÃO CONTROLADA
[C]
3-29
CÓPIA NÃO CONTROLADA
[D]
[E]
A294I206.WMF
A294/A295