PAPER FEED ROLLER REPLACEMENT
3.3 PAPER FEED ROLLER REPLACEMENT
1. Remove the right cover.
2. Pull out the paper trays.
3. Remove the pick-up roller [A] (1 snap ring).
4. Remove the feed roller [B] (1 snap ring).
5. Remove the separation roller [C] from the torque limiter [D] (1 snap ring).
NOTE: 1) The paper feed (pick-up, feed, separation) rollers used in the 1st ~3rd
feed units in the paper tray unit are different from the feed rollers used in
the LCT. They are not interchangeable.
2) Do not touch the surface of the rollers with bare hands.
Note that there are counters for these rollers that you may wish to reset after
installing a new roller (A294: SP 7-816).
A294/A295
CÓPIA NÃO CONTROLADA
9-16
CÓPIA NÃO CONTROLADA
[C]
[A]
B303R103.WMF
[B]
[D]
SM