Management Port Connector Pinout Information For An Ex6200 Switch; Table 35: Management Port Connector Pinout Information For Ex6200; Switches - Juniper EX6210 Complete Hardware Manual

Complete Hardware Guide for EX6210 Ethernet Switches
Related
Documentation

Management Port Connector Pinout Information for an EX6200 Switch

Table 35: Management Port Connector Pinout Information for EX6200 Switches
Pin
1
2
3
4
5
6
7
8
60
Table 34: EX Series Switches RJ-45 to DB-9 Serial Port Adapter Pinout
Information (continued)
RJ-45 Pin Signal
4 GND
6 RXD
7 DSR
8 CTS
Connecting an EX Series Switch to a Management Console on page 186
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 192
Connecting an EX9200 Switch to a Management Console or an Auxiliary Device
Connecting and Configuring an EX9200 Switch (CLI Procedure)
The 10/100/1000 BASE-T management port on an EX6200 switch uses an RJ-45
connector to connect to a management device for out-of-band management.
The port uses an autosensing RJ-45 connector to support a 10/100/1000Base-T
connection. Two LEDs on the port indicate link/activity on the port and the administrative
status of the port. See "Management Port LEDs in EX6200 Switches" on page
Table 35 on page 60 provides the pinout information of the RJ-45 connector. An RJ-45
cable, with a connector attached, is supplied with the switch.
Signal
TRP1+
TRP1-
TRP2+
TRP3+
TRP3-
TRP2-
TRP4+
TRP4-
DB-9 Pin Signal
5 GND
3 TXD
4 DTR
7 RTS
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
Copyright © 2014, Juniper Networks, Inc.
30.