Ac Power Disconnection Warning - Juniper EX6210 Complete Hardware Manual

Complete Hardware Guide for EX6210 Ethernet Switches

AC Power Disconnection Warning

292
Connecting AC Power to an EX4300 Switch
Connecting AC Power to an EX4500 Switch
Connecting AC Power to an EX4550 Switch
Connecting AC Power to an EX6200 Switch on page 177
Connecting AC Power to an EX8200 Switch
Connecting AC Power to an EX9204 Switch
Connecting AC Power to an EX9208 Switch
Connecting AC Power to an EX9214 Switch
Connecting AC Power to an XRE200 External Routing Engine
Connecting AC Power to a QFX3100 Director Device
Connecting AC Power to a QFX3008-I Interconnect Device with Single-Phase Wiring
Trays
Connecting AC Power to a QFX3008-I Interconnect Device with Three-Phase Delta Wiring
Trays
Connecting AC Power to a QFX3008-I Interconnect Device with Three-Phase Wye Wiring
Trays
Connecting AC Power to a QFX3500, QFX3600, or QFX3600-I Device
Connecting AC Power to a QFX5100 Switch
This topic applies to hardware devices in the EX Series product family, which includes
switches, the EX Series Redundant Power System (RPS), and the XRE200 External
Routing Engine.
This topic also applies to hardware devices in the QFX Series.
WARNING: Before working on the switch or near power supplies, unplug all
the power cords from an AC switch.
Waarschuwing Voordat u aan een frame of in de nabijheid van voedingen
werkt, dient u bij wisselstroom toestellen de stekker van het netsnoer uit het
stopcontact te halen.
Varoitus Kytke irti vaihtovirtalaitteiden virtajohto, ennen kuin teet mitään
asennuspohjalle tai työskentelet virtalähteiden läheisyydessä.
Attention Avant de travailler sur un châssis ou à proximité d'une alimentation
électrique, débrancher le cordon d'alimentation des unités en courant
alternatif.
Copyright © 2014, Juniper Networks, Inc.