Removing An Ex6210 Switch From A Rack Or Cabinet - Juniper EX6210 Complete Hardware Manual

Complete Hardware Guide for EX6210 Ethernet Switches
Related
Documentation

Removing an EX6210 Switch from a Rack or Cabinet

202
Halting re1
*** FINAL System shutdown message from user@switch***
System going down IMMEDIATELY
Shutdown NOW!
[pid 859]
user@switch> JWaiting (max 300 seconds) for system process `vnlru' to stop...done
Waiting (max 300 seconds) for system process `bufdaemon' to stop...done
Waiting (max 300 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 2 2 1 1 0 0 0 0 done
syncing disks... All buffers synced.
Uptime: 3h3m49s
recorded reboot as normal shutdown
The operating system has halted. Please press any key to reboot.
CAUTION: The final output of any version of this command is the "The
operating system has halted. Please press any key to reboot" message.
Wait at least 60 seconds after first seeing this message before following
the instructions in step 4 to power off the switch.
Attach the ESD grounding strap to your bare wrist and connect the strap to the ESD
3.
point on the chassis.
Flip the power supply
4. Enable
supply LEDs. The power supply LEDs should turn off (appear unlit). Repeat this step
for all installed power supplies.
NOTE: If you have only one power supply in your switch, ensure that you have
halted your system safely before turning off the power supply.
After you power off a power supply, wait for at least 60 seconds before you
turn it back on. After you power on a power supply, wait for at least 60
seconds before you turn it back off.
Powering On an EX6200 Switch on page 184
Connecting AC Power to an EX6200 Switch on page 177
Connecting DC Power to an EX6200 Switch on page 180
If you want to move an installed EX6210 switch to another location, you need to remove
it from the rack or cabinet in which it is installed. The front-mounting brackets (ears)
attached to the chassis are bolted to the rack and secure the chassis to the rack.
switch to the off position (OFF). Observe the power
Copyright © 2014, Juniper Networks, Inc.