Installing Switch Components; Installing And Removing Ex6210 Switch Hardware Components - Juniper EX6210 Complete Hardware Manual

CHAPTER 9

Installing Switch Components

Installing and Removing EX6210 Switch Hardware Components

Copyright © 2014, Juniper Networks, Inc.
Installing and Removing EX6210 Switch Hardware Components on page 149
Installing an AC Power Supply in an EX6200 Switch on page 150
Installing a DC Power Supply in an EX6200 Switch on page 153
Installing a Fan Tray in an EX6210 Switch on page 154
Installing an SRE Module in an EX6210 Switch on page 156
Unpacking an EX6200 Line Card on page 159
Installing a Line Card in an EX6200 Switch on page 160
Installing a Transceiver in an EX Series Switch on page 164
Connecting a Fiber-Optic Cable to an EX Series Switch on page 166
Installing the Air Filter in an EX6210 Switch on page 167
The EX6210 switch chassis is a rigid sheet-metal structure that houses the hardware
components. The field-replaceable units (FRUs) in an EX6210 switch are:
Switch Fabric and Routing Engine (SRE) module
48-port PoE+ line card
48-port RJ-45 line card
48-port SFP line card
Power supplies (AC or DC)
Fan tray
SFP transceiver
SFP+ transceiver
The SRE module is hot-removable or hot-pluggable depending on the configuration of
the switch. See "EX6210 Switch Configurations" on page
All the line cards are hot-removable and hot-insertable. However, we recommend that
you take them offline before removing them.
7.
149