To Db-9 Serial Port Adapter Pinout Information For An Ex Series; Switch; Table 34: Ex Series Switches Rj-45 To Db-9 Serial Port Adapter Pinout; Information - Juniper EX6210 Complete Hardware Manual

Table 33: EX Series Switches Console Port Connector Pinout Information (continued)
Pin Signal
6 RxD Input
7 CD Input
8 CTS Input
Related
Documentation
RJ-45 to DB-9 Serial Port Adapter Pinout Information for an EX Series Switch
Copyright © 2014, Juniper Networks, Inc.
Description
Receive data
Data carrier detect
Clear to send
EX2200 Switches Hardware Overview
Rear Panel of an EX3200 Switch
Rear Panel of an EX3300 Switch
Rear Panel of an EX4200 Switch
EX4300 Switches Hardware Overview
Front Panel of an EX4500 Switch
EX4550 Switches Hardware Overview
Switch Fabric and Routing Engine (SRE) Module in an EX6200 Switch on page 26
Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch
Routing Engine (RE) Module in an EX8216 Switch
Connecting an EX Series Switch to a Management Console on page 186
Configuring the Console Port Type (CLI Procedure)
The console port on an EX Series switch is an RS-232 serial interface that uses an RJ-45
connector to connect to a management device such as a PC or a laptop. If your laptop
or PC does not have a DB-9 male connector pin and you want to connect your laptop or
PC to an EX Series switch, use a combination of the RJ-45 to DB-9 female adapter
supplied with the switch along with a USB to DB-9 male adapter.
Table 34 on page 59 provides the pinout information for the RJ-45 to DB-9 serial port
adapter.

Table 34: EX Series Switches RJ-45 to DB-9 Serial Port Adapter Pinout

Information

RJ-45 Pin Signal
1 RTS
2 DTR
3 TXD
Chapter 3: Component Specifications
DB-9 Pin Signal
8 CTS
6 DSR
2 RXD
59