Management Port Connector Pinout Information For Acx Series Routers - Juniper ACX2000 Hardware Manual

Table 29: Alarm Contact Connector Pinouts (continued)
Pin
Number Signal Definition
14 ALARM_OUT1_REF
15 ALARM_OUT2_NO/NC
SEE ALSO
ACX2000 and ACX2100 Universal Metro Router Overview | 17
Front Panel of an ACX2000 Router | 47
LEDs on ACX2000 and ACX2100 Routers | 57

Management Port Connector Pinout Information for ACX Series Routers

The management port— labeled MGMT— on an ACX Series router uses an RJ-45 connector to connect
to a management device for out-of-band management.
The port uses an autosensing RJ-45 connector to support a 10/100BASE-T connection. Two LEDs indicate
link activity on the port and the administrative status of the port.
Table 30 on page 87 provides the pinout information for the RJ-45 connector for the management port.
Table 30: Management Port Connector Pinout Information
Pin Description
1 TRD[0]-
2 TRD[0]+
3 TRD[1]-
4 TRD[1]+
5 TRD[2]-
Direction CLI Port Mapping
Output Output Alarm Port 1
Output Reserved for Major
alarm
Function
External alarm output 1 (this pin is
connected to Pin 13 in closed condition)
External alarm output 2 (this pin is
connected to Pin 9 in closed condition)
Direction
In/Out
In/Out
In/Out
In/Out
In/Out
87