Juniper EX6210 Complete Hardware Manual page 217

Copyright © 2014, Juniper Networks, Inc.
On the J-Web login page, type root as the username, leave the password field blank,
4.
and click .
Login
On the Introduction page, click
5.
On the Basic Settings page, modify the hostname, the root password, and date and
6.
time settings:
Enter the hostname. This is optional.
Enter a password and reenter the password.
Specify the time zone.
Synchronize the date and time settings of the switch with the management PC or
set them manually by selecting the appropriate option button. This is optional.
Click Next .
Use the Management Options page to select the management scenario:
7.
NOTE: On EX4500, EX6210, and EX8200 switches, only the out-of-band
management option is available.
In-band Management—Use VLAN 'default' for management
Select this option to configure all data interfaces as members of the default VLAN.
Click . Specify the management IP address and the default gateway for the
Next
default VLAN.
In-band Management—Create new VLAN for management
Select this option to create a management VLAN. Click
name, VLAN ID, member interfaces, management IP address, and default gateway
for the new VLAN.
Out-of-band Management—Configure management port
Select this option to configure only the management interface. Click
the IP address and default gateway for the management interface.
Click Next .
8.
On the Manage Access page, you can select options to enable Telnet, SSH, and SNMP
9.
services. For SNMP, you can configure the read community, location, and contact.
Click . The Summary screen displays the configured settings.
Next
10.
Click Finish . The configuration is committed as the active switch configuration.
11.
Chapter 11: Performing Initial Configuration
Next .
.
.
. Specify the VLAN
Next
.
. Specify
Next
197