Installing A Line Card In An Ex6200 Switch; Figure 55: Unpacking A Line Card Used In An Ex6200 Switch - Juniper EX6210 Complete Hardware Manual

Complete Hardware Guide for EX6210 Ethernet Switches
Related
Documentation

Installing a Line Card in an EX6200 Switch

160
Remove the line card from the antistatic bag.
5.
Save the shipping carton and packing materials in case you need to move or ship the
6.
line card later.

Figure 55: Unpacking a Line Card Used in an EX6200 Switch

Packing a Line Card Used in an EX6200 Switch on page 254
Installing a Line Card in an EX6200 Switch on page 160
48-Port RJ-45 Line Card in an EX6200 Switch on page 31
48-Port PoE+ Line Card in an EX6200 Switch on page 32
EX6200 switches have field-replaceable unit (FRU) line cards that can be installed in
the line card slots or the Switch Fabric and Routing Engine (SRE) module slots on the
front of the switch chassis. See
line cards are hot-insertable and hot-removable: You can remove and replace them
without powering off the switch or disrupting switch functions.
NOTE: We recommend that you take the line cards offline before removing
them.
NOTE: Installation of a line card in the SRE module slots (slots 4 and 5) in
an EX6200 switch is supported in Junos OS Release 12.1 or later.
Before you begin installing a line card in the switch:
Ensure that you have taken the necessary precautions to prevent electrostatic discharge
(ESD) damage (see "Prevention of Electrostatic Discharge Damage" on page
Ensure that you know how to handle and store the line card (see
Line Cards in EX6200 and EX8200 Switches" on page
"Slot Numbering for an EX6210 Switch" on page
231).
Copyright © 2014, Juniper Networks, Inc.
12. The
288).
"Handling and Storing