Juniper EX6210 Complete Hardware Manual page 105

Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
NOTE: A grounding lug (Panduit LCD2-14A-L), two ¼-20 x 0.5 screws and
two flat washers are shipped with the EX6210 chassis.
The grounding cable that you provide for the switch must be the same gage as the power
source cables or as permitted by the local code.
WARNING: The switch is pluggable type A equipment installed in a
restricted-access location. It has a separate protective earthing terminal
provided on the chassis in addition to the grounding pin of the power supply
cord. This separate protective earthing terminal must be permanently
connected to earth ground for installations that require a separate grounding
conductor to the chassis.
AC Power Supplies in an EX6200 Switch on page 38
DC Power Supply in an EX6200 Switch on page 49
Connecting AC Power to an EX6200 Switch on page 177
Connecting DC Power to an EX6200 Switch on page 180
Chapter 3: Component Specifications
85