Figure 77: Removing An Ex6210 Switch Chassis Without Using A Mechanical - Juniper EX6210 Complete Hardware Manual

Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
WARNING: To prevent injury, keep your back straight and lift with your
legs, not your back. Do not twist your body as you lift. Balance the load
evenly and be sure that your footing is firm.
Two people should hold onto the bottom of the chassis and carefully lift it out of the
2.
rack. If you have a pallet jack, move the switch onto the pallet jack.
Figure 77: Removing an EX6210 Switch Chassis Without Using a
Mechanical Lift
Carefully move the chassis to its new location.
3.
After you move the switch to its new location, reinstall the components in the chassis or
store the components in antistatic bags. See:
Installing an SRE Module in an EX6210 Switch on page 156
Installing a Line Card in an EX6200 Switch on page 160
Installing a Fan Tray in an EX6210 Switch on page 154
Installing an AC Power Supply in an EX6200 Switch on page 150
Installing a DC Power Supply in an EX6200 Switch on page 153
Removing an EX6210 Switch from a Rack or Cabinet Using a Mechanical Lift on page 204
Chapter 12: Removing the Switch
0
1
2
3
4
5
6
7
8
9
207