Power Requirements For Ex6210 Switch Components; Ac Power Cord Specifications For An Ex6200 Switch; Table 49: Ex6210 Switch Component Power Requirements; Calculating Power Requirements For An Ex6210 Switch - Juniper EX6210 Complete Hardware Manual

Table 48: Power Specifications for a 2100 W DC Power Supply Used in an EX6200
Switch (continued)
Item
Output power
Related
Documentation

Power Requirements for EX6210 Switch Components

Table 49: EX6210 Switch Component Power Requirements

Components
Fan tray
Switch Fabric and Routing Engine (SRE) module
48-port PoE+ line card (EX6200-48P)
48-port RJ-45 line card (EX6200-48T)
48-port SFP line card (EX6200-48F)
PoE enabled (per port)
PoE+ enabled (per port)
Related
Documentation

AC Power Cord Specifications for an EX6200 Switch

Copyright © 2014, Juniper Networks, Inc.
Specifications
2100 W
DC Power Supply in an EX6200 Switch on page 49
DC Power Supply LEDs in an EX6200 Switch on page 52
Table 49 on page 109 lists the maximum power requirements for different hardware
components of an EX6210 switch under typical voltage conditions.
AC Power Supplies in an EX6200 Switch on page 38
DC Power Supply in an EX6200 Switch on page 49
Calculating Power Requirements for an EX6210 Switch on page 113
Each AC appliance inlet on the AC power supply requires a dedicated AC power feed.
Most sites distribute power through a main conduit that leads to frame-mounted power
distribution panels, one of which can be located at the top of the rack that houses the
switch. Each AC power cord connects the power supply to the power distribution panel.
Chapter 7: Planning Power Requirements
Maximum Power Requirements (Watts)
300 W
100 W
Maximum base power requirement: 220 W
Maximum PoE+ power requirement: 1440 W
150 W
250 W
15.4 W
30 W
109