Juniper EX6210 Complete Hardware Manual page 134

Complete Hardware Guide for EX6210 Ethernet Switches
114
Table 51: EX6210 Switch Component Power Requirements (continued)
Components
48-port PoE+ line card (EX6200-48P)
48-port RJ-45 line card (EX6200-48T)
48-port SFP line card (EX6200-48F)
PoE enabled (per port)
PoE+ enabled (per port)
NOTE: The calculations in this topic use the maximum possible values for
PoE+. However, you can configure the PoE or PoE+ power budget of each
line card to values lower than the maximum requirements. See Configuring
PoE (CLI Procedure).
Maximum Power Requirements (Watts)
Maximum base power requirement: 220 W
Maximum PoE+ Power Requirement =
(Maximum Number of Ports on the Line Card )
* (Maximum PoE+ Power Requirement Per
Port)
Maximum PoE+ Power Requirement = (48) *
(30 W)
Maximum PoE+ Power Requirement = 1440 W
150 W
250 W
15.4 W
30 W
Copyright © 2014, Juniper Networks, Inc.