Figure 41: Installing An Ex6210 Switch In A Two-Post Rack; Figure 42: Installing An Ex6210 Switch In A Four-Post Rack - Juniper EX6210 Complete Hardware Manual

Complete Hardware Guide for EX6210 Ethernet Switches
Related
Documentation
140
with at least one person supporting the rear of the chassis until you can bolt the chassis
into the rack.
If a mechanical lift is not available, remove all components and ensure that at least
two people are available to lift the empty chassis into the rack. For instructions on
how to install the chassis without using a mechanical lift, see
Switch on a Rack or Cabinet Without Using a Mechanical Lift" on page
Insert 24 mounting screws appropriate for your rack (not provided) into the aligned
3.
holes. Use the appropriate Phillips (+) screwdriver to tighten the screws to the rack
or cabinet rail.

Figure 41: Installing an EX6210 Switch in a Two-Post Rack

Two-post rack

Figure 42: Installing an EX6210 Switch in a Four-Post Rack

(Optional)
Adjustable
bracket
Connecting AC Power to an EX6200 Switch on page 177
Rack Requirements for an EX6210 Switch on page 97
"Mounting an EX6210
Front-mounting
bracket
Front-mounting
bracket
Copyright © 2014, Juniper Networks, Inc.
143.