Ex6210 Switch Configurations; Table 5: Ex6210 Switch Hardware Shipping Configurations - Juniper EX6210 Complete Hardware Manual

Table 4: Power Supplies Supported on EX6200 Switches (continued)
Power Supply Input Voltage Supported
5000 W AC Low-voltage line
High-voltage line
2100 W DC –48 VDC through –60 VDC
Related
Documentation

EX6210 Switch Configurations

Table 5: EX6210 Switch Hardware Shipping Configurations

Switch Configuration
96-port RJ-45 system
configuration (AC) (with
2500 W AC power supply)
Copyright © 2014, Juniper Networks, Inc.
Only one power supply (either AC or DC) is shipped with the different chassis shipping
configurations. You can purchase additional power supplies separately. See
Supplies in an EX6200 Switch" on page 38
on page 49.
CAUTION: Mixing different types of power supplies (AC and DC or AC power
supplies of different wattage) in the same chassis is not supported.
Mixing low-voltage input line and high-voltage input line power feeds in the
same chassis is not supported.
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 192
Field-Replaceable Units in an EX6210 Switch on page 25
The EX6210 switch is available for shipping in four configurations.
lists the hardware configurations for the switch and the components included in each
shipping configuration.
Model Number
EX6210-S64-96T-A25
Output Power
With one power feed connected: 1250 W
With two power feeds connected: 2500 W
With one power feed connected: 2500 W
With two power feeds connected: 5000 W
2100 W
and "DC Power Supply in an EX6200 Switch"
Configuration Components
Chassis with backplane
One fan tray
One Switch Fabric and Routing Engine (SRE) module
One SRE module cover panel (one line card cover panel and
one SRE module filler panel)
Two 48-port RJ-45 line cards
One 2500 W AC power supply
One power cord
Six line card cover panels
Three 2500 W AC power supply cover panels
One power supply blank shelf
Chapter 1: EX6210 Switch Overview
"AC Power
Table 5 on page 7
7