Rj-45 Management Port Connector Pinout Information; Rj-45 To Db-9 Serial Port Adapter Pinout Information; Table 56: Rj-45 Management Port Connector Pinout Information - Juniper EX9214 Hardware Manual

RJ-45 Management Port Connector Pinout Information

Table 56: RJ-45 Management Port Connector Pinout Information

Pin Signal
1 TRP1+
2 TRP1-
3 TRP2+
4 TRP3+
5 TRP3-
6 TRP2-
7 TRP4+
8 TRP4-
Related
Documentation

RJ-45 to DB-9 Serial Port Adapter Pinout Information

Copyright © 2017, Juniper Networks, Inc.
Front Panel of an EX4500 Switch
Management Panel of an EX4600 Switch
EX4550 Switches Hardware Overview
Switch Fabric and Routing Engine (SRE) Module in an EX6200 Switch
Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch
Routing Engine (RE) Module in an EX8216 Switch
Routing Engine Module in an EX9200 Switch on page 29
Booting an EX Series Switch Using a Software Package Stored on a USB Flash Drive
Table 56 on page 127 provides the pinout information for the RJ-45 connector for the
management port on Juniper Networks devices.
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
Connecting a Device to a Network for Out-of-Band Management
The console port is an RS-232 serial interface that uses an RJ-45 connector to connect
to a management device such as a PC or a laptop. If your laptop or PC does not have a
DB-9 male connector pin and you want to connect your laptop or PC to the device, use
a combination of the RJ-45 to DB-9 female adapter along with a USB to DB-9 male
adapter.
Chapter 9: Pinout Specifications
127